APC Smart-UPS RT 15kVA RM 230V

SKU: SURT15KRMXLI

Price:

9,269.37 USD

Warranty:

2-Year Limited

Enquire about this product

Out of Stock

Enter your email to get notified when the item is back in stock.

Condition: New
Shipping: Free within 3-7 Days


Output Power Capacity	12.0 KW / 15.0 kVA
Max Configurable Power (Watts)	12.0 KW / 15.0 kVA
Nominal Output Voltage	230V
Output Voltage Note	Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Output Voltage Distortion	Less than 5%
Output Frequency (sync to mains)	50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages	220, 240V
Crest Factor	3 : 1
	Double Conversion Online
Waveform Type	Sine wave
Output Connections	(1) Hard Wire 3-wire (H N + G) (Battery Backup) , (1) Hard Wire 5-wire (3PH + N + G) (Battery Backup) , (2) IEC Jumpers (Battery Backup) , (8) IEC 320 C19 (Battery Backup)
Overload Operation	60 seconds @ 125% and 30 seconds @ 150%
Bypass	Built-in Static Bypass , Internal Bypass (Automatic and Manual) , Optional External Bypass

Input
Nominal Input Voltage	230V 400 3PH
Input Frequency	40 - 70 Hz (auto sensing)
Input Connections	Hard Wire 3 wire (1PH+N+G) , Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations	160 - 280 V
Other Input Voltages	220 , 240
Maximum Input Current	90 A
Input Breaker Capacity	100 A
Input Total Harmonic Distortion	Less than 5% for full load

Batteries & Runtime
Battery Type	Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules	4
Typical recharge time	2.5 hour(s)
Replacement Battery	APCRBC140
RBC Quantity	4
Nominal Battery Voltage	+/-192 V (split battery referenced to neutral)
Efficiency in Battery Operation	93.00 %

Communications & Management
Interface Port(s)	DB-9 RS-232 , RJ-45 10/100 Base-T , Smart-Slot
Pre-Installed SmartSlot™ Cards	AP9631
Control panel	Multi-function LCD status and control console
Audible Alarm	Audible and visible alarms : configurable delays
Emergency Power Off (EPO)	Yes

Surge Protection and Filtering
Filtering	Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical
Maximum Height	533.0 mm
Maximum Width	432.0 mm
Maximum Depth	773.0 mm
Rack Height	12 U
Net Weight	247.73 kg
Shipping Weight	314.09 kg
Shipping Height	990.0 mm
Shipping Width	610.0 mm
Shipping Depth	1003.0 mm
Color	Black
Units per Pallet	1.0

Environmental
Operating Environment	0 - 40 °C
Operating Relative Humidity	0 - 95 (non-condensing) %
Operating Elevation	0-3000 meters
Storage Temperature	-15 - 45 °C
Storage Relative Humidity	0 - 95 (non-condensing) %
Storage Elevation	0-15000 meters
Audible noise at 1 meter from surface of unit	50.000 dB
Online Thermal Dissipation	2800.000 BTU/hr
Protection Class	IP 20

Conformance
Approvals	EN/IEC 62040-1-1 , EN/IEC 62040-2 , VDE
Standard warranty	2 years repair or replace

Sustainable Offer Status
RoHS	Compliant
REACH	REACH: Contains SVHCs

Brand

APC

Model

SURT15KRMXLI

Issue:

Which External Battery Pack (XLBP) and RBC is compatible with my Smart-UPS On-Line (SRT) model?

Product Line:

Smart-UPS Online

Environment:

All SRT models and all SRT external battery packs, All Serial Numbers

Cause:

There are specific External Battery Pack and RBC models which are compatible with a group of UPS models.

Resolution:

When selecting an External Battery Pack (XLBP) or RBC for a UPS system, use the table below to select compatible models.

NOTE: Each external battery pack has a keyed mating connector that is only compatible with its corresponding UPS. If you find that a connector is binding or requires excessive force to insert you should STOP and check compatibility of the UPS and battery pack.

UPS Model (beginning with)	Battery Type	Replacement Battery Pack (RBC)	Battery Module Voltage	Total Battery Voltage for the UPS	External Battery Pack Connector Color	External Battery Pack (XLBP)
SRT1000XL, SRT1500XL, SRT1000RMXL, SRT1500RMXL	Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof	APCRBC155	48 VDC	48 VDC	Blue	SRT48BP SRT48RMBP
SRT1000UXI-LI, SRT1500UXI-LI	Lithium Ion NMC chemistry	No internal battery - uses external battery system	NA	See manual	Blue	XBP48RM1U-LI Note: The UPS does not support any other make/type of battery packs.
SRT2200XL, SRT2200RMXL	Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof	APCRBC141	72 VDC	72 VDC	Green	SRT72BP SRT72RMBP
SRT3000XL, SRT3000RMXL	Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof	APCRBC152	96 VDC	96 VDC	Brown	SRT96BP SRT96RMBP
SRT5K, SRT6K	Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof	APCRBC140	96 VDC	192 VDC	White	SRT192BP SRT192RMBP
SRT8K, SRT10K	Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof	APCRBC140	96 VDC	+192 VDC -192 VDC	White	SRT192BP2 SRT192RMBP2

Issue

Which UPS Network Management Card 2 (NMC2) firmware applications work with my SRT model UPS?

Users experiencing NMC2->UPS communication problems, such as "UPS: Lost the local network management interface-to-UPS communication" or no UPS information displayed after upgrading NMC2 firmware.

Product Line

Smart-UPS Online models with model prefix SRT
UPS Network Management Card 2 - AP9630/AP9630CH, AP9631/AP9631CH, AP9635/AP9635CH (when supported)

Environment

Aforementioned SRT UPS models
Users utilizing the embedded NMC2 available within SRT models
Users adding or upgrading a secondary NMC2 to the available SRT UPS SmartSlot accessory slot

Cause

This knowledge base will help outline which NMC2 firmware application versions support SRT model Smart-UPS Online UPSs as to prevent unwanted communication problems and inform users which firmware upgrades to perform and/or avoid.

Resolution

Beginning in June 2014, regions where Smart-UPS Online models with the model prefix SRT will begin shipping. These UPS models now have an embedded UPS NMC2 with the sumx firmware APP version v6.0.7. This version should not be upgraded to v6.1.1, even though v6.1.1 is presumably a newer version. v6.0.7 is currently required to access UPS information for users utilizing the NMC2.

This also applies to users who wish to add a secondary AP9630 or AP9631 standalone NMC2. v6.0.7 firmware application must be used as v6.1.1 sumx is incompatible.

A newer version of the sumx application has been made available available to replace both v6.1.1 and v6.0.7 for users - v6.2.0.

NMC2 Firmware Application Version	Compatible with SRT UPS?
v5.X.X sumx	No
v6.0.7 sumx	Yes
v6.1.1 sumx	No
v6.2.0 sumx and higher	Yes

If you're unsure of your firmware application, in the web interface, go to About->Network menu. Via Command Line Interface, the firmware application version will be shown on the top right immediately after log in.