Oman
APC Smart-UPS RT 5kVA 230V With NMC
-
Warranty:2-Year Limited
-
Condition: New
- Shipping: within 3-7 Days
Overview
Lead time
Usually in Stock
General
provided equipment
Smart UPS signalling RS-232 cable
User manual
USB cable
Physical
depth
62 cm
height
17.78 cm
net weight
51.9 kg
width
44 cm
Input
network frequency
40...70 Hz auto-sensing
number of input connectors
1 hard wire 3-wire (1P + N + E)
input voltage limits
100...280 V adjustable
160...285 V
inputvolt_other
220 V
240 V
maximum input current
30 A
switching current capacity
40 A
input voltage
230 V
Output
rated power in W
5000 W
Maximum configurable power in W
5000 W
harmonic distortion
Less than 2 %
output frequency
50/60 Hz +/- 3 Hz sync to mains
outputvolt_other
220 V
240 V
crest factor
3 : 1
UPS type
Double conversion online
Wave type
Sine wave
output connector type
Hard wire 3-wire (H N + E) 1
nb of power socket outlets
2 IEC 60320 C13
1 IEC 60320 C19
bypass type
Internal bypass (automatic and manual)
output voltage
230 V
Conformance
product certifications
CE
standards
EN/IEC 62040-1
Environmental
ambient air temperature for operation
0…40 °C
relative humidity
0…95 % non-condensing
operating altitude
0...6600 ft
ambient air temperature for storage
-15…45 °C
storage altitude
0.00…15240.00 m
acoustic level
55 dBA
heat dissipation
1108.95 Btu/h
IP degree of protection
IP20
Issue:
Which External Battery Pack (XLBP) and RBC is compatible with my Smart-UPS On-Line (SRT) model?
Product Line:
Smart-UPS Online
Environment:
All SRT models and all SRT external battery packs, All Serial Numbers
Cause:
There are specific External Battery Pack and RBC models which are compatible with a group of UPS models.
Resolution:
When selecting an External Battery Pack (XLBP) or RBC for a UPS system, use the table below to select compatible models.
NOTE: Each external battery pack has a keyed mating connector that is only compatible with its corresponding UPS. If you find that a connector is binding or requires excessive force to insert you should STOP and check compatibility of the UPS and battery pack.
UPS Model (beginning with) Battery Type Replacement Battery Pack (RBC) Battery Module Voltage Total Battery Voltage for the UPS External Battery Pack Connector Color External Battery Pack (XLBP)
SRT1000XL, SRT1500XL, SRT1000RMXL, SRT1500RMXL Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof APCRBC155 48 VDC 48 VDC Blue SRT48BP
SRT48RMBP
SRT1000UXI-LI, SRT1500UXI-LI Lithium Ion NMC chemistry No internal battery - uses external battery system NA See manual Blue XBP48RM1U-LI
Note: The UPS does not
support any other make/type of battery packs.
SRT2200XL, SRT2200RMXL Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof APCRBC141 72 VDC 72 VDC Green SRT72BP
SRT72RMBP
SRT3000XL, SRT3000RMXL Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof APCRBC152 96 VDC 96 VDC Brown SRT96BP
SRT96RMBP
SRT5K, SRT6K Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof APCRBC140 96 VDC 192 VDC White SRT192BP
SRT192RMBP
SRT8K, SRT10K Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof APCRBC140 96 VDC +192 VDC
-192 VDC White SRT192BP2
SRT192RMBP2
Issue
Which UPS Network Management Card 2 (NMC2) firmware applications work with my SRT model UPS?
Users experiencing NMC2->UPS communication problems, such as "UPS: Lost the local network management interface-to-UPS communication" or no UPS information displayed after upgrading NMC2 firmware.
Product Line
- Smart-UPS Online models with model prefix SRT
- UPS Network Management Card 2 - AP9630/AP9630CH, AP9631/AP9631CH, AP9635/AP9635CH (when supported)
Environment
- Aforementioned SRT UPS models
- Users utilizing the embedded NMC2 available within SRT models
- Users adding or upgrading a secondary NMC2 to the available SRT UPS SmartSlot accessory slot
Cause
This knowledge base will help outline which NMC2 firmware application versions support SRT model Smart-UPS Online UPSs as to prevent unwanted communication problems and inform users which firmware upgrades to perform and/or avoid.
Resolution
Beginning in June 2014, regions where Smart-UPS Online models with the model prefix SRT will begin shipping. These UPS models now have an embedded UPS NMC2 with the sumx firmware APP version v6.0.7. This version should not be upgraded to v6.1.1, even though v6.1.1 is presumably a newer version. v6.0.7 is currently required to access UPS information for users utilizing the NMC2.
This also applies to users who wish to add a secondary AP9630 or AP9631 standalone NMC2. v6.0.7 firmware application must be used as v6.1.1 sumx is incompatible.
A newer version of the sumx application has been made available available to replace both v6.1.1 and v6.0.7 for users - v6.2.0.
| NMC2 Firmware Application Version | Compatible with SRT UPS? |
| v5.X.X sumx | No |
| v6.0.7 sumx | Yes |
| v6.1.1 sumx | No |
| v6.2.0 sumx and higher | Yes |
